Navigációs menü
BYPL_MeterReplacementProcess_Banner

Meter replacement process

Útkövető
BYPL_MeterReplacementProcess_Content

The process for replacement of faulty, defective, inaccurate and incorrect range meters with accurate meters is as follows:

  • On the mutually agreed date a team will come to test the consumer's old meter and check the report about the further usability of the existing meter.
  • After ensuring, if a meter change is required, the meter will be replaced by a BSES stock meter.
  • Additionally work related to the bus-bar and service line will be noted.
  • In case the consumer is not satisfied with BSES meter accuracy
    • Consumer can get the meter tested by BSES.
    • Consumer can get the meter tested by independent laboratory as specified by DERC
  • Kindly note the following points
  • NABL approved meter testing labs in Delhi
    • Electronic Regional Test Lab, Block-S, Okhla Industrial area Phase-2, New Delhi-110020.
    • National Physical Lab Delhi, Dr. K.S. Krishnan Marg, Rajinder Place, New Delhi-110012.
    • BSES Yamuna Power Limited(BYPL) Laboratory, Near Local Shopping Center, Main Market, Savita Vihar.
    • BSES Rajdhani Power Limited(BRPL) Laboratory, Sub-station-15, Sector-7, Pushap Vihar, Near Modern park, New Delhi-110017.
    • BSES Meter Testing Labs.
    • Choose your own Meter (Process/List of Approved Make/Manufacture/Application form for installation)
    • Choose your own Meter (Consumer own choice meter)
    • Name of BYPL RWA Electrician Trained by BSES
  • Meter cost for the year 2018 is as follow-
BSES Yamuna Power Limited
Single Phase ₹ 1270
Three Phase ₹ 3368